Intel SBX44 - Server Compute Blade, Инструкция по установке и эксплуатации

Страница: 48 / 92

36
Intel® Server Compute Blade SBX44: Installation and User’s Guide
6.
Insert the combined blade and expansion unit into three adjacent system chassis bays.
✏
NOTE
For the Intel
®
Blade Server Chassis SBCE: When any blade or option is in blade bay 7
through 14, power modules must be present in power bays 1 and 2, and power modules
must be present in power bays 3 and 4.
7. Turn on the blade server.
8. If you have not already done so, install the LSI device drivers for your operating system. LSI
device drivers are on the Resource CD that comes with the system chassis.
With the storage expansion unit installed on your blade server, you can install up to two hot-swap
SCSI hard disk drives in the option and configure them for embedded mirroring (RAID level1). Each
SCSI device must have a unique SCSI ID. This ID enables the SCSI controller in the expansion
option to identify the device and ensure that different devices on the same SCSI channel do not
attempt to transfer data simultaneously. The SCSI IDs for the hard disk drives in the expansion unit
are permanent (not configurable). Table 4 on page 37 lists the SCSI IDs for the hard disk drives that
are installed in the expansion unit. See “Installing a SCSI hot-swap hard disk drive” on page 37 for
instructions on installing hard disk drives.
TP00378