Intel® Server Board S3420GP TPS
BIOS User Interface
Revision 2.4
Intel order number E65697-010
63
Setup Item
Options
Help Text
Comments
Onboard NIC iSCSI
ROM
Enabled
Disabled
If enabled. loads the embedded option ROM for
the onboard network controllers.
Warning:
If [Disabled] is selected, NIC1 and NIC2
cannot be used to boot or wake the system.
This option is grayed out
and not accessible if either
the NIC1 or NIC2 ROMs
are enabled.
Note:
This option is not
available on some models.
NIC 1 MAC Address
No entry
allowed
Information only.
12 hex
digits of the MAC address.
NIC 2 MAC Address
No entry
allowed
Information only.
12 hex
digits of the MAC address.
6.3.2.2.7
System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows the user to configure the
thermal characteristics of the system.
To access this screen from the Main screen, select
Advanced
>
System Acoustic and
Performance Configuration
.
Advanced
System Acoustic and Performance Configuration
Set Throttling Mode
Auto
/CLTT/OLTT
Altitude
300m or less/
301m-900m
/901m – 1500m/Higher than 1500m
Set Fan Profile
Performance
, Acoustic
Figure 27. Setup Utility – System Acoustic and Performance Configuration Screen Display
Table 26. Setup Utility – System Acoustic and Performance Configuration Screen Fields
Setup Item
Options
Help Text
Comments
Set Throttling
Mode
Auto
CLTT
OLTT
[Auto] – Auto Throttling mode.
[CLTT] – Closed Loop Thermal Throttling Mode.
[OLTT] – Open Loop Thermal Throttling Mode.
Note:
The OLTT
option is shown for
informational
purposes only.
If
the user selects
OLTT, the BIOS
overrides that
selection if the
system can support
CLTT. OLTT is
configured only when
UDIMMs without
Thermal Sensors are
installed.