Intel® Server Board S3420GP TPS
Appendix D: POST Code Errors
Revision 2.4
Intel order number E65697-010
123
Appendix D: POST Code Errors
Whenever possible, the BIOS outputs the current boot progress codes on the video screen.
Progress codes are 32-bit quantities plus optional data. The 32-bit numbers include class,
subclass, and operation information. The class and subclass fields point to the type of hardware
that is being initialized. The operation field represents the specific initialization activity. Based on
the data bit availability to display progress codes, a progress code can be customized to fit the
data width. The higher the data bit, the higher the granularity of information that can be sent on
the progress port. The progress codes may be reported by the system BIOS or option ROMs.
The Response section in the following table is divided into three types:
No Pause:
The message displays on the screen during POST or in the Error Manager.
The system continues booting with a degraded state. The user may want to replace the
erroneous unit. The setup POST error Pause setting does not have any effect with this
error.
Pause:
The message displays on the Error Manager screen, and an error is logged to
the SEL. The setup POST error Pause setting determines whether the system pauses to
the Error Manager for this type of error, where the user can take immediate corrective
action or choose to continue booting.
Halt:
The message displays on the Error Manager screen, an error is logged to the SEL,
and the system cannot boot unless the error is resolved. The user must replace the
faulty part and restart the system. The setup POST error Pause setting does not have
any effect with this error.
Table 76. POST Error Messages and Handling
Error Code
Error Message
Response
0012
CMOS date/time not set
Pause
0048
Password check failed
Halt
0108
Keyboard component encountered a locked error.
No Pause
0109
Keyboard component encountered a stuck key error.
No Pause
0113
Fixed Media The SAS RAID firmware cannot run properly. The user should attempt to
reflash the firmware.
Pause
0140
PCI component encountered a PERR error.
Pause
0141 PCI
resource
conflict
Pause
0146
PCI out of resources error
Pause
0192
L3 cache size mismatch
Halt
0194
CPUID, processor family are different
Halt
0195
Front side bus mismatch
Pause
0196 Processor
Model
mismatch
Pause
0197
Processor speeds mismatched
Pause
0198
Processor family is unsupported.
Pause
019F
Processor and chipset stepping configuration is unsupported.
Pause
5220
CMOS/NVRAM Configuration Cleared
Pause
5221
Passwords cleared by jumper
Pause
5224
Password clear Jumper is Set.
Pause
8110
Processor 01 internal error (IERR) on last boot
Pause
8111
Processor 02 internal error (IERR) on last boot
Pause
