Intel H2216JFFJR, Руководство по обслуживанию

Страница: 15 / 88

Server System Features
2 Intel
®
Server System H2000JF Family Service Guide
Feature Description
Memory

Unbuffered DDR3 and registered DDR3 DIMMs.

Memory DDR3 data transfer rates of 800, 1066, 1333 MT/s and 1600 MT/s.

DDR3 standard I/O voltage of 1.5V (all speed) and DDR3 Low Voltage of 1.35V (1333MT/s or
below).
Chipset on each Compute
Node Intel
®
C600-A chipset with support for optional Storage Upgrade Keys.
Compute Node
External I/O connections

DB-15 Video connectors.

Two RJ-45 Network Interface for 10/100/1000 LAN.

One stacked two port USB 2.0 (Port 0/1) connectors.

One dedicated 1GbE management port on rIOM carrier (Optional).

One InfiniBand* QDR QSFP port (Board SKU: S2600JFQ) or

One InfiniBand* FDR QSFP port (Board SKU: S2600JFF).
Compute Node Internal
I/O connectors/headers

Bridge Slot to extend board I/O:
- SCU0 (Four SAS 3Gb/s ports) to backplane.
- Front control panel signals.
- One SATA (Port 0) 6Gb/s port for DOM.

Spare Bridge Slot to extend board I/O:
- Mini SAS port (Four SAS 6Gb/s ports) to backplane.
- Front control panel signals.

One Type-A USB 2.0 connector (USB port 2).

One 2x7 pin header for system FAN module.

One DH-10 serial Port A connector.

One SATA 6 Gb/s (Port 1).

One 2x4 pin header for Intel
®
RMM4 Lite.

One 1x4 pin header for Storage Upgrade Key.
Available I/O Module
Options
(Sold Separately)
The following I/O modules utilize a single proprietary on-board connector. An installed I/O
module can be supported in addition to standard on-board features and any add-in expansion
cards:

Quad Port Intel
®
I350 GbE I/O Module

Dual Port Intel
®
X540 10GbE I/O Module

Dual Port Intel
®
82599 10GbE I/O Module

QDR InfiniBand* ConnectX I/O Module

FDR InfiniBand* ConnectX I/O Module
System Fans by each
Compute Node

Three sets of dual rotor managed system fans.

One internal power supply fan for each installed power supply unit.
Compute Node Riser
Cards
Three PCIe Gen III x16 riser slots:

Riser slot 1 support PCIe Gen III x16 Riser with LP PCIe add-in card.

Riser slot 2 supports PCIe Gen III x8 Riser (for Intel
®
rIOM and RMM4 NIC port). Or
customized PCIe x8 riser for Non-Transparent Bridge (NTB) feature

Riser slot 3 cannot be used with bridge board covered.

One Bridge Slot for board I/O expansion.
Node Video

Integrated 2D Video Controller

128 MB DDR3 Memory
Node On-board storage
controllers and options

Two single port SATA connectors (on baseboard and bridge board) capable of supporting up to
6 GB/sec.

SCU0 4-port up to 3 GB/sec SAS/SATA through bridge board.

Intel
®
RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID
capabilities.