Server System Features
Intel
®
Server System H2000JF Family Service Guide
9
Jumper Name
Jumper Position
Mode of
Operation
Note
J1E1: BIOS Recovery
Mode
1-2
Normal
Normal mode
2-3
Recovery
BIOS in recovery mode
J1D5: BIOS Default
1-2
Normal
Normal mode
2-3
Clear BIOS
Settings
BIOS settings are reset to factory default
Figure 12. Configuration Jumpers
Hard Disk Drive Carriers
The Intel
®
Server System H2000JF ships in two different basic SKUs, and with different maximum
number of hard disk drives, see the following table for details :
Table 4. Hard Disk Drive Options
Intel
®
Server System
Supported Hard Drive Type
Maximum Hard Drive Number
H2312JF
3.5'' or 2.5''
12
H2216JF
2.5''
16
Note:
SAS drives are only supported when proper Intel
®
RAID C600 Upgrade Key is installed.
Note:
Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum
ambient temperature of 45
°
C.
Note:
The Intel
®
Server System H2000JF does not support all SAS or Serial ATA (SATA) hard drives. For
a web link to a list of supported hard drives, see
Additional Information and Software.
Bezel
The front bezel is available as optional accessory for the server system:
Figure 13. Front View of System Bezel
Hot-Swap SAS/SATA Backplane
The Hot-Swap SAS/SATA backplane serves as an interface between the mother board and the
system drives. The following diagrams show the location for each connector found on the
backplane.