iii. To generate the simulation setup files, click Tools
➤
Generate Simulator
Setup Script for IP....
iv. Set the output directory to
.../simulation
.
Figure 7.
Generating Simulation Setup File Using GUI
b. Using command-line:
i.
Open a command-line terminal.
ii. Make sure your environment variable points to the
bin/bin64
in your
Intel Quartus Prime installation directory
iii. Change the current directory to the generated
simulation
folder in your
terminal.
iv. Run this command
source sim_setup_gen.sh
.
2. Go to
simulation
folder.
3. Go to the desired simulator folder and run the simulation script:
a. ModelSim* SE or Questa* FE: Bring up the simulator GUI, change directory
to mentor folder and type
do mentor.do
b. VCS*: Go to
synopsys/vcs
folder and type
source vcs_sim.sh
.
c. VCS MX: Go to
synopsys/vcsmx
folder and type
source vcsmx_sim.sh
d. Xcelium* (supported verilog only): Go to
xcelium
folder and type
source
xcelium_sim.sh
(1)
4. A successful simulation ends with the following message:
(1)
Xcelium is not supporting VHDL format.
1. F-Tile SDI II Intel
®
Agilex
™
FPGA IP Design Example Quick Start Guide
710496 | 2022.01.28
F-Tile SDI II Intel
®
Agilex
™
FPGA IP Design Example User Guide
8