Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011 Скачать руководство пользователя страница 52

Страница: 52 / 134

Thermal Specifications

Thermal/Mechanical Specifications and Design Guidelines

6.1.6

Thermal Metrology

The maximum TTV case temperatures (T

CASE-MAX

) can be derived from the data in the

appropriate TTV thermal profile earlier in this chapter. The TTV T

CASE

is measured at the

geometric top center of the TTV integrated heat spreader (IHS).

Figure 6-5

illustrates

the location where T

CASE

temperature measurements should be made. See

Figure B-12

for drawing showing the thermocouple attach to the TTV package.

Note:

The following supplier can machine the groove and attach a thermocouple to the IHS.

The supplier is listed below as a convenience to Intel’s general customers and the list

may be subject to change without notice. THERM-X OF CALIFORNIA Inc, 3200

Investment Blvd, Hayward, Ca 94545. Ernesto B Va1-510-441-7566 Ext. 242

[email protected]. The vendor part number is XTMS1565.

Figure 6-5. TTV Case Temperature (T

CASE

) Measurement Location

37.5

Measure T

CASE

the geometric

center of the

package

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011







































































































































Результаты поиска

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Отзывы:

Бренды по названию

Популярные бренды

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011, Технические характеристики

Результаты поиска

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Отзывы:

Бренды по названию

Популярные бренды