Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 134

background image

2

Thermal/Mechanical Specifications and Design Guidelines

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,

BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS

PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER,

AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING

LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY

PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or

life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel

reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to them.
The processor and Intel Series 6 Chipset and LGA1155 socket may contain design defects or errors known as errata which may

cause the product to deviate from published specifications. Current characterized errata are available on request.
“Intel® Turbo Boost Technology requires a PC with a processor with Intel Turbo Boost Technology capability. Intel Turbo Boost

Technology performance varies depending on hardware, software and overall system configuration. Check with your PC

manufacturer on whether your system delivers Intel Turbo Boost Technology.For more information, see

http://www.intel.com/technology/turboboost

.”

Enhanced Intel

®

SpeedStep

®

Technology See the Processor Spec Finder or contact your Intel representative for more information.

Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family,

not across different processor families. See

www.intel.com/products/processor_number for details

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Intel, Intel Core, Pentium, and the Intel logo are trademarks of Intel Corporation in the U.S and other countries.
* Other brands and names may be claimed as the property of others.
Copyright © 2011 Intel Corporation.

«
1
2
3
4
...
»

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011







































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Бренд: D-Link Страницы: 12

Бренд: GE Страницы: 6

Бренд: LAWO Страницы: 154

Бренд: Salus Страницы: 16

Бренд: Garland Страницы: 6

Бренд: DAQ system Страницы: 41

Бренд: DAQ system Страницы: 19

Бренд: Kramer Страницы: 2

PowerBeam PBE-5AC-400-ISO

Бренд: Ubiquiti Страницы: 23

Бренд: ZyXEL Communications Страницы: 3

Бренд: ZALMAN Страницы: 16

Бренд: UNICORECOMM Страницы: 19

Бренд: FiberHome Страницы: 44

Бренд: DPS Telecom Страницы: 80

Xtreme Networked Boat

Бренд: Broadband Products Страницы: 16

SATA II-150 PCI

Бренд: SIIG Страницы: 16

Symphonique Strings SRX-04

Бренд: Roland Страницы: 12

Бренд: TERSUS Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды