25
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose No 28-31 menu. The
2.
LCD displays "
PG PA" PG PB, PG PC,
PG PD
.
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
MICROPHONE PA, PB, PC, PD KEY SETUP
For Menu details, please refer to "Microphone Operation" at pages 31-32.
NOTE
7
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 34 menu. The LCD displays "
SCAN
".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
RF SQUELCH LEVEL SETUP
OFFSET DIRECTION SETUP
SCAN DWELL TIME SETUP
Wh en squelch level f unction is on, you can cancel squelch only when
the signal strength reach the level setup by users.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 32 menu. The LCD displays
"
RF SQL
".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
S-2:
Able to hear the calling when the power meter reach 1 bar.
choose No 33 menu. The LCD displays "
RPT MOD
".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted Offset direction.
4.
-
: Minus offset, means transmitting frequency lower than receiving
frequency.
+
: P l u s o ff s e t , m e a n s t r a n s m i t t i n g
frequency higher than receiving frequency.
OFF:
OFFSET is turn off. Transmitting frequency is same as receiving
frequency.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
S-5:
Able to hear the calling when the
power meter reach 4 bar.
S-9:
Able to hear the calling when the power meter reach 8 bar.
S-FULL:
Able to hear the calling when the power meter reach full bar.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Switch the Main Band selector knob to choose wanted value.
4.
MANUAL:
Auto Storage function is enabled.
AUTO:
Auto Storage function is disabled.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to sore setup and exit.
