19
7
General Setting
Press
1.
key to enter function menu.
Switch the Main band selector knob to
2.
choose No 11 menu, the LCD displays "
RX CDCS
"
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to choose wanted value
4.
OFF:
Turn off CTCSS/DCS decode.
CTCSS:
Choose CTCSS decode.
DCS:
Choose DCS decode.
Press the Main band selector knob to enter the menu.
5.
Switch the Main band selector knob to choose wanted CTCSS, DCS
6.
code.
CTCSS:
62-254.1Hz, and one self-defin
group, total 52 groups
DCS:
000N-777I, total 1024 groups
Press the Main band selector knob or
7.
key to store value and back to function menu. Press
key
or hold selector knob for over 0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 12 menu. the LCD displays "
DSP SUB
"
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to choose wanted value.
4.
FREQ:
display sub band frequency,
DC-IN:
display sub band voltage.
OFF:
turn off display for sub band
Press the Main band selector knob or
5.
key to store value and back to
function menu. Press
key or hold
selector knob for over 0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 13 menu. the LCD displays "
DTMF D
"
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to choose wanted value.
4.
100MS:
The Pre-Loading time is 100MS
300MS:
The Pre-Loading time is 300MS
600MS:
The Pre-Loading time is 500MS
800MS:
The Pre-Loading time is 800MS
1000MS:
The Pre-Loading time is 1000MS
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for
over 0.5 second to store setup and exit.
CTCSS/DCS DECODE SETUP
SUB BAND DISPLAY SETUP
DTMF ENCODE PRE-LOADING TIME
The working of CTCSS/DCS decode shall be work associated with the
squelch mode setup. (Refer to Squelch Mode setup at page 20)
Press the Main band selector knob or
7.
key to store value and
back to function menu. Press
key or hold selector knob for
over 0.5 second to store setup and exit.
7
NOTE
