24
General Setting
To avoid the receiving of sub band disturbing the communication of the
main band, you can turn on this function. The RX of the sub band will be
mute during the RX or TX of the main band.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 25 menu. The LCD displays "
MUTE
"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
TX:
When the Main band is transmitting, the sub band receiving will
be mute.
RX:
When the Main band is receiving, the
sub band receiving will be mute.
RX/TX:
the sub band receiving always mute.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
SUB BAND MUTE SETUP
EDIT CHANNEL NAME
7
After edit a name for a channel, if the display mode is "channel name",
the LCD displays the name edited in this menu. Otherwise it will display the
selected frequency.
.
Press
1.
key to enter function menu.
Switch the selector knob to choose NO 26
2.
function menu, the LCD displays "
NAME C
".
Press the Main band selector knob to enter function setup.
3.
Switch the selector knob to choose
4.
wanted character.
Press the selector knob to confirm current character and start edit
5.
next character, after editing all 7 characters, press the selector knob
to edit and back to function menu.
If editing not reach 7 characters, press
6.
key to return to function
menu, then press
key or hold selector knob for over 0.5 second
to store setup and exit.
CHANNEL FUNCTION AUTO STORAGE SETUP
Switch the Main band selector knob to choose wanted value.
4.
ON:
Function enabled.
TX and RX frequencies will be
exchanged; CTCSS and DCS signaling will be exchanged if
existed in current channel.
OFF:
Disable Frequency Reverse function.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
to enter function menu
Turn the Main band selector knob to choose No 27 menu. The
2.
LCD will show the
"HYPER"
indication.
Press the Main band selector knob to
3.
enter function setup.
This function is used to store latest setup for each single channel. When
this function is enabled, all the latest temporary operation on selected
channel will be stored. When this function is disabled, the temporary
setup will not be stored; all channel informations will be resumed to the
last stored values.
