!
Pick up a known load weight and lower the loaded forks to the ground. Input into the system the known
load weight (
Our example is 2000
) and press
“Enter key”
↵
. The LCD display will show
Activate lift control valve and lift loaded forks just above the ground. Do not manipulate the tilt, side
shifter or move vehicle. After few seconds calibrated load weight value of 2000 will stored.
Within few seconds the LCD will show.
As soon the loaded forks are lowered to the ground the LCD display will show date / time .
System check weighing function calibration is completed.
System is ready to be used.
Overload Warning Function
(Optional)
As soon forks are lowered the LCD display will show
The LCD display will prompt you to input the overload load weight value. Input the applicable overload
value and press
“Enter key”
↵
. Press
F
key to exit the
ADMINISTRATIVE MENU
.
LCD Display
CALIBRATION 1
LIFT LOAD
LCD Display
CALIBRATION 1
LOWER FORKS
LCD Display
CALIBRATION 1
CONFIGURATED
LCD Display
CALIBRATION 1
LOWER FORKS
LCD Display
CALIBRATION 1
OVERLOAD = _
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7