C.
SOUNDST
AGE
12
36. ATTACH DSP AND AMPLFIER TO GEAR RACK
Line the DSP and amplifier up over the correct holes in the gear
rack. Using the (8) #6 x 1/4” screws, attach the DSP and the ampli-
fier to the gear rack
Replace the amplifier cover.
37. GEAR RACK COVER PANEL
Place the gear rack cover panel on top of the gear rack. To re-
move, simply press down on the left side to raise the right edge
up.
38. REMOVE UNDER-SEAT WOOFER (STEP 1)
Slide the passenger-side front seat all the way back Use a Torx
T-50 to remove the two bolts holding the front of the seat brack-
ets.
39. REMOVE UNDER-SEAT WOOFER (STEP 2)
Now slide the seat all the way forward. Remove the two bolts
holding the rear of the seat.
40. REMOVE UNDER-SEAT WOOFER (STEP 3)
Release the seat-back to the full forward position. You can now
lean the seat all the way back and it will stay in that position, giv-
ing you access to the underseat area. You may have to move the
seat a little forward or backward to get it to stay. You do not need
to disconnect the airbag connecter (we advise against it), but just
be aware that it is there and take care with it.
