10
26. ATTACH POSITIVE TERMINAL TO BATTERY
Locate the terminal attachment point shown. Remove the nut
with a 10mm socket and attach the positive wire terminal to the
battery terminal.
27. ATTACH NEGATIVE TERMINAL TO VEHICLE GROUND
Locate the vehicle ground point shown. Attach the negative ter-
minal.
28. ROUTE POWER WIRING INTO CENTER TRUNK COMPARTMENT
Route power wiring harness into the center trunk compartment.
29. HARDWARE SELECTION
Locate the (4) Amp Rack Mounting Points and Flange Nuts
30. ATTACH AMP RACK MOUNTING HARDWARE
Attach the (4) mounting feet to the amp rack with the flange nuts.
Do not remove the liner from the adhesive yet.
B.
AMPLIFIER & SIGNAL WIRING
