FIRMWARE UPDATE -6
DTR-8.8
Network Update Procedure (Continued)
9. Make sure that the target version is shown and press Cursor [-->] to add “
*
” on the left of the target version.
10. Press [
ENTER
] to start update.
11. After update completes, Network function will automatically restart.
12. Return the unit to the factory settings by holding down [
VCR/DVR
] and the pressing [
STANDBY/ON
].
S E RV E R
S t a r t u p. . .
U S B 1 / 1
o U S B s t o ra g e
N E T F / W u p d a t e
S H 4 A P L : * 7 7 0 2 p 0
<e.g.>
N e t F / W u p d a t e
. . . S T W. . .
ATTENTION:
DURING WRITING, DO NOT TURN OFF THE POWER
BECAUSE REWRITING WILL BE IMPOSSIBLE.
