background image

31

Speaker Setup

  Menu

 1.Speaker Setup
 2.Input Setup
 3.Listening Mode Setup
 4.Preference
 5.OSD Setup

    |ENTER| Quit:|OSD|

1.Speaker Setup
 

 1.Speaker Config 
 2.Speaker Distance
 3.Level Calibration
 4.Bass Peak Level

      |ENTER| Quit:|OSD|

1-2.Speaker Distance 

 a.Unit        :meters 
 b.Front L/R   : 3.60m
 c.Center      : 3.60m
 d.Surr Right  : 2.10m
 e.Surr Back R : 2.10m
 f.Surr Back L : 2.10m
 g.Surr Left   : 2.10m
 h.Subwoofer   : 3.60m
              Quit:|OSD|

1-2. Speaker Distance sub-menu

Here you will enter the distance from each speaker to your normal
listening position (Loudspeaker Position Time Synchronization*).
This is important for the timing of the acoustics to create the
proper sound space that the DTR-7.1 and today’s sound systems
are able to produce.

Note:

Speakers that you selected “No” or “None” for in the Speaker
Config sub-menu will not appear.

a. Unit

feet:

 Select if you will enter the distances in feet.

meters:

 Select if you will enter the distances in meters.

b. Front L/R

Set the distance from the front left and right speakers to your
normal listening position between 1 and 30 feet in 0.5-feet
intervals (0.3 to 9 meters in 0.15-meter intervals).

Position the front left and right speakers so that they are the same
distance from the listener. If they are not, you may lose the center
position for stereo sound.

c. Center

Set the distance from the center speaker to your normal listening
position between 1 and 30 feet in 0.5-feet intervals (0.3 to 9 meters
in 0.15-meter intervals).

d. Surr Right

Set the distance from the surround right speaker to your normal
listening position between 1 and 30 feet in 0.5-feet intervals (0.3 to
9 meters in 0.15-meter intervals).

e. Surr Back R

Set the distance from the surround back right speaker to your
normal listening position between 1 and 30 feet in 0.5-feet
intervals (0.3 to 9 meters in 0.15-meter intervals).

• This setting appears if set for two surround back speakers in

the Speaker Config sub-menu.

f. Surr Back L

Set the distance from the surround back left speaker to your
normal listening position between 1 and 30 feet in 0.5-feet
intervals (0.3 to 9 meters in 0.15-meter intervals).

• This setting appears if set for two surround back speakers in

the Speaker Config sub-menu.

Note:

For audio using surround back right and surround back left
speakers, a separately-sold 2-channel power amplifier is required.

f. Surr Back

Set the distance from the surround back speaker to your normal
listening position between 1 and 30 feet in 0.5-feet intervals (0.3 to
9 meters in 0.15-meter intervals).

• This setting appears if set for one surround back speaker in the

Speaker Config sub-menu.

g. Surr Left

Set the distance from the surround left speaker to your normal
listening position between 1 and 30 feet in 0.5-feet intervals (0.3 to
9 meters in 0.15-meter intervals).

h. Subwoofer

Set the distance from the subwoofer to your normal listening
position between 1 and 30 feet in 0.5-feet intervals (0.3 to 9 meters
in 0.15-meter intervals).

* Loudspeaker Position Time Synchronization is a registered trademark

of Lucasfilm Ltd.

  Menu

 1.Speaker Setup
 2.Input Setup
 3.Listening Mode Setup
 4.Preference
 5.OSD Setup

      |ENTER| Quit:|OSD|

1.Speaker Setup
 

 1.Speaker Config 
 2.Speaker Distance
 3.Level Calibration
 4.Bass Peak Level

      |ENTER| Quit:|OSD|

1-2.Speaker Distance 

 
 a.Unit        :meters 
 b.Front L/R   : 3.60m
 c.Center      : 3.60m
 d.Surr Right  : 2.10m
 
 f.Surr Back   : 2.10m
 g.Surr Left   : 2.10m
 h.Subwoofer   : 3.60m
              Quit:|OSD|

(Only one surround back speaker)

(Two surround back speakers)

Содержание DTR-7.1









































































Отзывы: