Integra DTR-7.1 Скачать руководство пользователя страница 69

Страница: 69 / 72

FM/AM TUNER

AM stations cannot be received.

• AM loop antenna is not connected.

➞

Connect the included AM loop antenna to the AM antenna
terminals.

Buzzing noise on AM stations (particularly
noticeable at night or with weak stations).

• Noise from electrical apparatus such as fluorescent lamp.

➞

Move the AM loop antenna to different position.

➞

Set up an outdoor AM antenna.

Noise is heard at high-pitched sounds on AM
stations.

• Noise from TV set.

➞

Place the AM loop antenna as far as possible from the TV.

➞

Move unit away from TV set.

Crackling noise on both AM and FM stations

• Noise caused by fluorescent lamp being turned on and off.

➞

Move antenna as far as possible from the fluorescent lamp.

• Noise from automobile ignition.

➞

Install an FM outdoor antenna as far as possible from the
road.

➞

Change the position or direction of the outdoor antenna.

The indicators light for stereo reception, but
sound is distorted and stereo separation is bad.

• Station is too strong.

➞

Change to FM indoor antenna.

• Multiple reflection of the radio waves because of tall buildings

or mountains.

➞

Use antenna that has better directivity and select a point
where distortion is least.

Indicators for stereo reception flicker and hiss is
heard on FM stations.

• Station is too weak.

➞

Install an outdoor FM antenna.

• Stereo FM broadcasts cover only about half the distance of an

ordinary broadcast.

➞

Change the position or direction of the outdoor antenna.

No preset station is recalled.

• Power cord has been unplugged or the POWER switch has

been turned off for a long time.

➞

The memory contents are lost. Store all stations again.

VIDEO and AUDIO

Desired picture does not appear.

• Improper connection.

➞

Check the connection again. Insert the plugs and
connectors completely.

• Video Setup sub-menu of Input Setup menu settings are

incorrect.

➞

Check Settings.

No OSD Menu display.

• Improper connection.

➞

Check connections.

• OSD Menu is displayed when monitor is connected to VIDEO

or S VIDEO of MONITOR OUT.

➞

Confirm connections.

• Monitor is connected to MONITOR OUT VIDEO when the

OSD output is set to “S Video” or monitor is connected to
MONITOR OUT S VIDEO when the OSD output is set to
“Video.”

➞

Check the OSD Config sub-menu of OSD Setup (page 29).

Picture and sound do not match.

• Improper connection.

➞

Check connections.

• Video Setup sub-menu of Input Setup menu settings are

incorrect.

➞

Check settings.

No sound, or sound of the selected source is not
heard.

• Digital Setup sub-menu of Input Setup menu settings are

incorrect.

➞

Check settings.

No picture appears on the TV screen (or monitor).

• TV (or monitor) is not set to receive the output signals from the

receiver.

➞

Set the TV (or monitor) to the receiver input.

• Video cable is not connected securely.

➞

Check connections.

• S VIDEO IN signal is output at VIDEO OUT and S VIDEO

OUT, but VIDEO IN signal is only output at VIDEO OUT.
Also, COMPONENT VIDEO IN signal is only output at
COMPONENT VIDEO OUT.

➞

Check the input and output signals.

Troubleshooting guide

Содержание DTR-7.1









































































Результаты поиска

Содержание DTR-7.1

Отзывы:

Похожие инструкции для DTR-7.1

Бренды по названию

Популярные бренды

Integra DTR-7.1, Руководство пользователя

Результаты поиска

Содержание DTR-7.1

Отзывы:

Похожие инструкции для DTR-7.1

Бренды по названию

Популярные бренды