Integra DTR-50.3, Инструкция по эксплуатации

Страница: 60 / 100

60
En
■
Zone 2 Power On Volume,
Zone 3 Power On Volume
`
Last , Min , 1 to 99 or Max (Absolute display)
`
Last , –
Q
dB , –81dB to +18dB (Relative display)
This setting determines what the volume will be for
Zone 2/3 each time the AV receiver is turned on.
To use the same volume level as when the AV receiver
was last turned off, select “
Last ”.
The “ Zone 2 Power On Volume ” and “ Zone 3 Power
On Volume ” cannot be set higher than the “ Zone 2
Maximum Volume ” and “ Zone 3 Maximum Volume ”
setting.
■
Zone 2 Component Video Out
`
Yes :
Select if a TV in Zone 2 is connected the
COMPONENT VIDEO ZONE 2 OUT .
`
No :
Select if no TV in Zone 2 is connected the
COMPONENT VIDEO ZONE 2 OUT .
If you’ve connected the COMPONENT VIDEO ZONE 2
OUT to a TV in Zone 2, this setting is set to “ Yes ”.
Note
• If the “ Zone 2 Component Video Out ” setting is set to “ No ”,
the same video signal as COMPONENT VIDEO MONITOR
OUT is output from ZONE 2 OUT (component).
Tuner
For AM/FM tuning to work properly, you must specify the
AM/FM frequency step used in your area. Note that when
this setting is changed, all radio presets will be deleted.
■
AM/FM Frequency Step (North American
models)
`
10kHz/200kHz :
`
9kHz/50kHz :
Select the frequency step according to your area.
■
AM Frequency Step (Australian models)
`
10kHz :
`
9kHz :
Select the frequency step according to your area.
HDMI
■
HDMI Control(RIHD)
`
Off
`
On
Turn this setting on to allow p -compatible
components connected via HDMI to be controlled by the
AV receiver (
➔
page 91 ).
Note
• When the setting is set to “ On ” and the menu is closed, the
names of connected p -compatible components and
“ RIHD On ” are displayed on the AV receiver.
“ Search… ”
→
“ (name) ”
→
“ RIHD On ”
When the AV receiver cannot receive the name of the
component, it is displayed as “
Player * ” or “ Recorder * ”, etc (“ * ”
shows up and indicates the number of components, when two or
more are received).
• When an
p
-compatible component is connected to the
AV receiver via an HDMI cable, the name of the connected
component is displayed on the AV receiver display. For
example, while you are watching TV broadcasting, if you
operate a Blu-ray Disc/DVD player (being powered on) with the
remote control of the AV receiver, the name of the Blu-ray
Disc/DVD player will be displayed on the AV receiver.
• Set it to
“
Off
” when a connected piece of equipment is not
compatible or it is unclear whether the equipment is compatible
or not.
• If operation is not normal when set to “ On ”, change the setting
to
“
Off
”.
• Refer to the connected component’s instruction manual for
details.
• When “ HDMI Control(RIHD) ” setting is set to “ On ”, the
power consumption on standby mode slightly increases.
(Depending on the TV status, the AV receiver will enter standby
mode as usual.)
• The
p
control does not support HDMI OUT SUB . Use
HDMI OUT MAIN instead.
• When the source equipment is connected with the
u
connection, it may malfunction if “ HDMI Control(RIHD) ” is
set to “ On ”.
■
HDMI Through
`
Off
`
Auto :
Detects the signal and automatically selects the input
source.
`
BD/DVD , VCR/DVR , CBL/SAT , GAME , PC ,
AUX , TV/CD , PHONO , PORT :
Selects the input source for which the HDMI
Through function is enabled.
`
Last :
The HDMI Through function is activated on the
input source selected at the time of setting the AV
receiver to standby mode.
When enabling the HDMI Through function, regardless of
whether the AV receiver is on or in standby, both audio
and video streams from an HDMI input will be output to
the TV or other components via HDMI connection. The
HDMI indicators light when enabled ( HDMI is dimly-
lit).
This setting is set to “
Auto ” automatically when the above
“ HDMI Control(RIHD) ” is set to “ On ”.