Integra DTR-50.3, Инструкция по эксплуатации

Страница: 44 / 100

44
En
Main Menu Input/Output Assign
Monitor Out
On the “ Monitor Out ” settings, you can select whether or
not to have the video sources’ images output through the
HDMI output.
If you connect your TV to HDMI output, “ Monitor Out ”
setting is automatically set and composite video, S-Video,
and component video sources are upconverted
*
and
output.
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT (not the HDMI output), “ Monitor Out ”
setting is automatically set and composite video and S-
Video sources are upconverted
*
and output.
Note
• See “Video Connection Formats” (
➔
page 88 ) for charts
showing how the “ Monitor Out ” and “ Resolution ” settings
affect the video signal flow through the AV receiver.
■
Monitor Out
`
Analog :
Select this if your TV is connected to the
COMPONENT VIDEO MONITOR OUT ,
MONITOR OUT S , or MONITOR OUT V .
`
HDMI Main :
Select this if your TV is connected to
HDMI OUT
MAIN
.
`
HDMI Sub :
Select this if your TV is connected to HDMI OUT
SUB .
`
Both :
Select this if your TVs are connected to HDMI OUT
MAIN and HDMI OUT SUB . Video signals are
output from both HDMI outputs at the resolution
supported by both TVs.
`
Both(Main) :
Select this if your TVs are connected to HDMI OUT
MAIN and HDMI OUT SUB . Video signals are
output from both HDMI outputs but HDMI OUT
MAIN will become a priority; depending on the
resolution, video signals may not be output from
HDMI OUT SUB .
`
Both(Sub) :
Select this if your TVs are connected to HDMI OUT
MAIN and HDMI OUT SUB . Video signals are
output from both HDMI outputs but HDMI OUT
SUB will become a priority; depending on the
resolution, video signals may not be output from
HDMI OUT MAIN .
Note
• If not connected to the same output you have selected in the
“ Monitor Out ” setting, the “ Monitor Out ” setting will be
automatically switched to “ Analog ” (
➔
page 89 ).
• When using the DeepColor function, if the “ Monitor Out ”
setting is set to “ Both(Main) ” or “ Both(Sub) ”, the number of
bits may be limited due to the capability of your TV connected
to a priority output.
Changing the “Monitor Out” setting manually
Input/Output Assign
IN
OUT
Composite video, S-Video,
component video
HDMI
HDMI
Composite video, S-Video,
component video
IN
OUT
Composite video, S-Video Component video
Composite video, S-Video Component video
1
Press Monitor Out on the front panel.
The current setting is displayed.
2
Press Monitor Out on the AV receiver repeatedly
to select:
`
Analog , HDMI Main , HDMI Sub , Both ,
Both(Main) or Both(Sub)