Integra DTR-5.6 Скачать руководство пользователя страница 47

Страница: 47 / 88

Listening to the Radio

—Continued

Selecting XM Radio Channels

There are two modes for selecting XM radio channels:

Channel Search mode

which allows you to select any

channel.

Category Search mode

which allows you to select

channels by category.

■

Channel Search Mode

Note:

Channels cannot be selected while the

indicator

is flashing, as tuning is in progress.

■

Category Search Mode

Note:

Channels cannot be selected while the

indicator

is flashing, as tuning is in progress.

Selecting the Previous Channel:

To listen to the previously selected XM channel.

Press the [Receiver] Remote
Mode button, and then press the
[Tuner] Input Selector button
repeatedly to select XM.

If “CHECK ANTENNA” appears on
the display, make sure the XM antenna
is connected properly.

Press the [Menu] button to select
“Channel Search” mode.

Use the Up and Down [

]/[

]

buttons to select a channel.

You can also use the Left and Right
[

]/[

] buttons to select a category.

Return

Channel name

Channel number

Press the [Receiver] Remote
Mode button, and then press the
[Tuner] Input Selector button
repeatedly to select XM.

If “CHECK ANTENNA” appears on
the display, make sure the XM antenna
is connected properly.

Press the [Menu] button to select
“Category Search” mode.

Use the Left and Right [

]/[

]

buttons to select a category, and
use the Up and Down [

]/[

]

buttons to select a channel in
that category.

Press the [Receiver] Remote
Mode button, followed by the
[Return] button.

You can also use the AV receiver’s
[Return] button.

DTR-5.6.book Page 47 Thursday, September 22, 2005 5:07 PM

Содержание DTR-5.6

























































































Результаты поиска

Содержание DTR-5.6

Отзывы:

Похожие инструкции для DTR-5.6

Бренды по названию

Популярные бренды

Integra DTR-5.6, Инструкция по эксплуатации

Результаты поиска

Содержание DTR-5.6

Отзывы:

Похожие инструкции для DTR-5.6

Бренды по названию

Популярные бренды