Integra DTR-20.3, Инструкция по эксплуатации

Страница: 60 / 92

60
En
Zone 2
In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of
the rooms, you can specify a different input source.
There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an amp in Zone 2.
Connecting Your Zone 2 Speakers Directly
to the AV receiver
This setup allows 5.1-channel playback in your main room
and 2-channel stereo playback in Zone 2, with a different
source in each room. This is called Powered Zone 2, as the
Zone 2 speakers are powered by the AV receiver.
Note
• With this setup, the volume of Zone 2 is controlled by the AV
receiver.
• Powered Zone 2 cannot be used if “ Speakers Type (Front) ” is
set to “ Bi-Amp ” (
➔
page 45 ).
Connecting the Zone Speakers to an
Additional Amplifier
This setup allows 7.1-channel playback in your main
listening room and 2-channel stereo playback in Zone 2.
Note
• With the default settings, the Zone 2 volume must be set on the
Zone 2 amp. If your Zone 2 amp has no volume control, set the
“
Zone 2 Out ” setting to “ Variable ” so that you can set the Zone
2 volume on the AV receiver.
See “Multi Zone” (
➔
page 55 ).
Making Zone 2 Connections
To use this setup, you must set the “Powered Zone 2”
setting to “Yes” (
➔
page 45 ).
L R
Main room
TV
AV receiver
Zone 2
Setting the Zone 2 Out
R L
IN
Main room
TV
Zone 2
AV receiver
Receiver/
integrated amp