Integra DTR-20.3 Скачать руководство пользователя | Manualshive

Страница: 76 / 92

background image

76

En

Network/USB Features

The following diagram shows how you can connect the
AV receiver to your home network. In this example, it’s
connected to a LAN port on a router, which has a 4-port
100Base-TX switch built-in.

■

Ethernet Network

For the best results, a 100Base-TX switched Ethernet
network is recommended. Although it’s possible to play
music on a computer that’s connected to the network
wirelessly, playback may be unreliable, so it is
recommended to use wired connections.

■

Ethernet Router

A router manages the network, data-routing and supplying
of IP addresses. Your router must support the following:
• NAT (Network Address Translation). NAT allows

several networked computers to access the Internet
simultaneously via a single Internet connection. The AV
receiver needs Internet access for Internet radio.

• DHCP (Dynamic Host Configuration Protocol). DHCP

supplies IP addresses to the network devices, allowing
them to configure themselves automatically.

• A router with a built-in 100Base-TX switch is

recommended.

Some routers have a built-in modem, and some ISPs
require you to use specific routers. Please consult your ISP
or computer dealer if you’re unsure.

■

CAT5 Ethernet cable

Use a shielded CAT5 Ethernet cable (straight-type) to
connect the AV receiver to your home network.

■

Internet Access (for Internet radio)

To receive Internet radio, your Ethernet network must
have Internet access. A narrowband Internet connection
(e.g., 56K modem, ISDN) will not provide satisfactory
results, so a broadband connection is strongly
recommended (e.g., cable modem, xDSL modem, etc).
Please consult your ISP or computer dealer if you’re
unsure.

Note

• To receive Internet radio with the AV receiver, your broadband

Internet connection must be working and able to access the Web.
Consult your ISP if you have any problems with your Internet
connection.

• The AV receiver uses DHCP to configure its network settings

automatically. If you want to configure these settings manually,
see “Network” (

➔

page 57

).

• The AV receiver does not support PPPoE settings, so if you have

a PPPoE-type Internet connection, you must use a PPPoE-
compatible router.

• Depending on your ISP, you may need to specify a proxy server

to use Internet radio. If your computer is configured to use a
proxy server, use the same settings for the AV receiver
(

➔

page 57

).

Connecting to the Network

WAN

LAN

Modem

Router

Computer or media server

Internet radio

Network Requirements

«
...
74
75
76
77
78
...
»

Содержание DTR-20.3





























































































Отзывы:

Нет отзывов

Похожие инструкции для DTR-20.3

Бренд: Baofeng Страницы: 4

Бренд: Baofeng Страницы: 22

Бренд: Jensen Страницы: 98

Бренд: Kathrein Страницы: 44

Бренд: Magnat Audio Страницы: 54

Бренд: Maas Страницы: 72

Бренд: Teac Страницы: 4

TELEVISION RECEIVER

Бренд: Zenith Страницы: 8

Бренд: Woxcon Страницы: 7

Бренд: AMX Страницы: 1

Бренд: B&K Страницы: 84

Бренд: Aiwa Страницы: 37

Бренд: RadioMaster Страницы: 2

Бренд: Nakamichi Страницы: 13

Бренд: Teac Страницы: 47

Бренд: Teac Страницы: 47

Бренд: National Страницы: 26

Бренд: Boss Audio Systems Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды