Integra DTR-20.3, Инструкция по эксплуатации

Страница: 43 / 92

43
En
Main Menu Input/Output Assign
Monitor Out
You can specify the output resolution for the HDMI OUT
and have the AV receiver upconvert the picture resolution
as necessary to match the resolution supported by your
TV.
■
Resolution
`
Through :
Select this to pass video through the AV receiver at
the same resolution and with no conversion.
`
Auto :
Select this to have the AV receiver automatically
convert video at resolutions supported by your TV.
`
480p ( 480p/576p ), 720p , 1080i , 1080p
Select the desired output resolution.
`
1080p/24 :
Select this for 1080p output at 24 frames per second.
`
4K Upscaling :
Select this for an output resolution four times that of
1080p, resulting in 3840
×
2160 pixels.
Note
• Depending on the incoming video signal, the video playback
may not be smooth or the vertical resolution may be lowered. In
this case select anything other than “
1080p/24 ”.
HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to
HDMI IN 2 ,
you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, composite video and component video
sources can be upconverted
*
to HDMI. See “Video
Connection Formats” for more information on video
signal flow and upconversion (
➔
page 82 ).
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , PC ,
TV/CD , PORT
`
HDMI1 , HDMI2 , HDMI3 , HDMI4 , HDMI5 :
Select a corresponding HDMI input to which the
video component has been connected.
`
- - - - - :
Select this to output composite video and component
video sources from the
HDMI OUT
. The video
signal from the HDMI output is configured in
“Component Video Input” (
➔
page 44
).
*1 If you connect your personal computer to PC IN (Analog
RGB), you must assign “ - - - - - ” to the “ PC ” input selector.
Each HDMI input cannot be assigned to two input
selectors or more. When
HDMI1 - HDMI5 have already
been assigned, you must first set any unused input
selectors to “
- - - - - ” or you will be unable to assign
HDMI1 - HDMI5 to other input selectors.
Note
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “ Digital
Audio Input ” (
➔
page 44
). In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “
Audio Selector ” setting (
➔
page 53 ).
• The “ TUNER ” selector cannot be assigned and is fixed at the
“ - - - - - ” option.
• “ AUX ” is used only for input from the front panel.
• Do not assign an
HDMI IN
to the
TV/CD
selector while “ HDMI
Control (RIHD) ” is set to “ On ” (
➔
page 56 ), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign “ - - - - - ” to an input selector that is currently
selected in “ HDMI Through ” (
➔
page 56 ), the “ HDMI
Through ” setting will be automatically switched to “ Off ”.
• If you connect a component (such as UP-A1 Dock with docked
iPod/iPhone) to the
UNIVERSAL PORT
jack, you cannot
assign any input to the “ PORT ” selector.
Input/Output Assign
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
PC HDMI5 *1
AUX FRONT (Fixed)
TV/CD - - - - -
PORT - - - - -
IN
OUT
Composite video,
component video
Composite video,
component video
HDMI
HDMI