18
> Hookup
> Setup > Playback > Part Names
MAIN ROOM
ZONE 2B
ZONE 2A
1
ZONE 2 SPEAKER
A
ZONE 2 SPEAKER
B
(Also act as the HEIGHT jacks)
1
Speaker cable
if you connect:
ZONE 2 SPEAKER
You can enjoy 2ch audio in the separate room by, for example, playing
a Blu-ray Disc player in the main room (where this unit is located) and
listening to internet radio through the speakers in the separate room
(ZONE 2). This feature is not available if you have connected the front
speakers using Bi-Amping connection. You can play through a
maximum of 5.1 channels in the main room during ZONE 2 playback.
Listening modes such as Dolby Atmos cannot be selected.
ZONE 2 SPEAKER
You can connect up to two speaker systems and output the
same audio. To connect one speaker system, use the ZONE 2A
jacks, and to connect two speaker systems, use the ZONE 2B
jacks in addition to the ZONE 2A jacks. When connecting two
speaker systems, all speakers to be connected to the ZONE
2A/B jacks must have an impedance of 8 to 16 Ω. Please note
that it is not possible to connect to the ZONE 2B jacks when
height speakers are connected.
Connections with an AV component
Connect with HDMI IN 1 to 3 if you want to output an external
AV component to ZONE 2. If the AV component doesn't have
an HDMI jack, connect using a digital optical cable, digital
coaxial cable, or analog audio cable. If any of these are already
used, you do not have to connect using any of the others.
Setup
0
Settings are required in Initial Setup, "4. Multi
0
To use the ZONE 2A+B output, set "Zone
Speaker" in "1. AccuEQ Room Calibration" in Initial
Setup to "Zone 2 A + B" (
0
The audio from externally connected AV
components can only be output when the audio is
analog or 2ch PCM audio signals. If you have
connected to this unit with an HDMI cable or digital
optical/coaxial cable, may be necessary to convert
the audio output of the AV component to PCM output.
Содержание DRX-4
Страница 31: ...31...
