3
LPI-LCD-6
4~20mA Panel Display.
4~20mA Loop Powered Input.
Easy Front Mount Installation.
Loop Powered Display Backlight.
Description.
The LPI-LCD-6 - 4~20mA panel display is ideal for displaying a variety of process
variables, and is easy to scale to your required engineering units.
Features.
Easy installation
(front mounting unit takes up virtually no space behind the panel).
Loop powered display backlight.
Protection against reverse wiring and accidental 24V supply.
Easy calibration via on-screen menu.
Ordering Information.
LPI-LCD-6
One 4~20mA Loop Powered Input Panel Mount Display.
Product Liability.
This information describes our products. It does not constitute guaranteed properties and is not intended to affirm the
suitability of a product for a particular application. Due to on-going research and development, designs, specifications, and documentation are subject
to change without notification. Regrettably, omissions and exceptions cannot be completely ruled out. No liability will be accepted for errors, omissions
or amendments to this specification. Technical data are always specified by their average values and are based on Standard Calibration Units at 25°C,
unless otherwise specified. Each product is subject to the ‘Conditions of Sale’.
Warning: These products are not designed for use in, and should not be used for patient connected applications. In any critical installation
an independent fail-safe back-up system must always be implemented.
Specifications.
Input
4~20mA Loop Powered (24Vdc).
Minimum
Input
3.5mA.
Maximum
Input
100mA.
Load
220Ω Typical.
Full Scale Range
Adjustable Between -99,999 and +999,999.
Max Resolution
50,000 Counts.
A/D Conversion
16bit Sigma Delta.
Accuracy
±0.02%.
Temperature Coefficient
30ppm/°C Typical.
Conversion Rate
10 Readings per Second.
Protection
Reverse Polarity.
Accidental 24V Supply.
Power Supply
Designed to be powered from the 4~20mA current loop input signal.
Display
17.5mm LCD.
Units
Standard KG, LB, T, or Custom.
Decimal
Up to 4 Decimal Places.
±Over-Range
Shows ‘UNDER’ or ‘OVER’.
Housing
Rating
IP65.
Operating Humidity
10~85%RH Non Condensing.
Operating Temperature
-10~60°C.
Dimensions
144 x 72 x 25mm (WxHxD).
