Instruction Manual IGM402 Hornet
InstruTech
Page 23
SETUP CGS
(
continued)
- SETUP CG 1 [Press Enter key here to see the following choices]
SET VAC [Factory default =
0.00E+0 TORR
]
SET ATM [Factory default =
7.59E+2 TORR
]
ANALOG TYPE [Factory default =
LOG-LINEAR
]
- SETUP CG 2 [Press Enter key here to see the following choices]
SET VAC [Factory default =
0.00E+0 TORR
]
SET ATM [Factory default =
7.59E+2 TORR
]
ANALOG TYPE [Factory default =
LOG-LINEAR
]
ANALOG OUTPUT
- IG ANALOG CAL [Factory default =
Factory Set
]
- CG1 ANALOG CAL [Factory default =
Factory Set
]
- CG2 ANALOG CAL [Factory default =
Factory Set
]
SETUP COMMS
- BAUD RATE [Factory default =
19200, 8, N, 1
]
- ADDR [Factory default =
1
]
- ADDR OFFSET [Factory default =
0
]
- FORMAT [Factory default = BINARY]
SERVICE MENU
- INFO [Factory default =
FIRMWARE VERSION
]
- OP TIME [Factory default = Displays to-date operating time]
