User manual |
Safety Information
13
NOTICE: EACH AND EVERY REPAIR TO THE EQUIPMENT CAN ONLY BE
DONE BY INSTRAMED’S AUTHORIZED TECHNICAL ASSISTANCE CENTERS.
NOTICE: THE USE OF THE EAZY PRO IS RESTRICTED TO ONE PATIENT AT A
TIME.
NOTICE: THE APPLIED PARTS ARE PROTECTED AGAINST DEFIBRILLATION
DISCHARGE; DURING DISCHARGE THERE MAY BE BASELINE VARIATION.
NOTICE: AVOID CONNECTING THE PATIENT TO SEVERAL ITEMS OF
EQUIPMENT AT THE SAME TIME. THE LIMITS OF CURRENT LEAKAGE MAY
BE EXCEEDED.
NOTICE: THE APPLIED PARTS INTENDED TO COME INTO CONTACT WITH
THE PATIENT HAVE BEEN EVALUATED AND COMPLY WITH THE DIRECTIVES
AND PRINCIPLES OF ISO 10993-1.
NOTICE: WHEN REMOVING THE EQUIPMENT FROM THE PACKAGE,
CAREFULLY VERIFY IF THERE IS ANY ABNORMALITY OR VISIBLE
DAMAGE IN THE DEVICE OR ITS ACCESSORIES, CAUSED BY IMPACT OR
MISHANDLING DURING TRANSPORTATION. IN CASE OF IRREGULARITIES,
PLEASE CONTACT INSTRAMED.
NOTICE: DISPOSABLE ACCESSORIES AND ANY OTHER COMPONENTS
MUST BE DISPOSED OF ACCORDING TO THE NORMS OF HOSPITAL WASTE
DISPOSAL.
NOTICE: DO NOT MODIFY THIS EQUIPMENT WITHOUT AUTHORIZATION
FROM INSTRAMED.
ATTENTION: THE ADHESIVE PADS CANNOT BE IN CONTACT WITH THE
PATIENT WHILE EAZY PRO IS CONNECTED TO THE AC/DC EXTERNAL
SOURCE.
THE PADS SHOULD NOT BE PLACED ON THE PATIENT WHILE EAZY PRO
IS CONNECTED TO THE MAINS VIA ITS AC/DC EXTERNAL SOURCE. THE
SAME WAY EAZY PRO SHOULD NOT BE CONNECTED TO THE MAINS VIA
ITS AC/DC EXTERNAL SOURCE, WHILE THE PADS ARE POSITIONED ON
THE PATIENT. UNDER THESE CONDITIONS THE LEAKAGE CURRENT LIMITS
DEFINED IN NBR IEC 60601-1 AND NBR IEC 60601-2-4 FOR THIS CLASS OF
EQUIPMENT, MAY BE EXCEEDED.
ATTENTION: EAZY PRO SHOULD NOT BE CONNECTED TO THE AC/DC
EXTERNAL SOURCE WHEN IN USE.
EAZY PRO WAS DESIGNED TO OPERATE ONLY FROM ITS INTERNAL
BATTERY AND WHEN DISCONNECTED FROM ITS AC/DC EXTERNAL
SOURCE, THAT IS DESIGNATED ONLY TO FEED THE CHARGER’S INTERNAL
BATTERY EAZY PRO. EAZY PRO DOES NOT WORK WHILE CONNECTED TO
YOUR AC/DC EXTERNAL SOURCE, TURNING ITSELF OFF AUTOMATICALLY
WHEN IT DETECTS THIS CONDITION.
