Instone EASIER, Руководство пользователя

Страница: 5 / 23

www.instone3d.com
4
Installation
I. Remove the protecting clip on the plain shaft
II. Install the Feed Pipe
1. Press down the feeding coupling aside the radiator, then insert the white feed pipe
2. Insert the other end of the feed pipe into the socket of the remote extruder
III. Place the printing plate
IV. Feed
1. Unpack the PLA filament from the package, and find out the end of it
2. Bend the head material straightly, and trim the end of the material with scissor
3. Press the spring of the extruder by hands, then insert the filament from the hole on
the bottom of the extruder to the other end of the Feed Pipe (until you can’t insert
anymore). Then hang the filament tray on the hook on side of the printer (Note:
Arrange the filament neatly and DO NOT in a mess).
V. Inserting the TF Card
VI. Plug in and Power on