Instone EASIER, Руководство пользователя

Страница: 17 / 23

www.instone3d.com
16
⑴
Dual extrusion overlap (the machine doesn’t support this function, so the
parameter is invalid): it is used for double-color printing to make the fusion of two
colors more natural.
⑵
Minimal layer time: ensure PLA to have full cooling time and make the printing
effect perfecter.
⑶
Enable cooling fan: please check this option when printing with PLA filament.
7. Additional Parameter Setting of Slicing:
(It is applicable to professional printing effect contrast. The common printing just
adopts the default value without entering this setting)
Select menu bar “Expert” -> “Open expert setting” to enter the expert printing
setting.
⑴
Retraction
Minimum travel: the movement distance that triggers
retraction.
Enable combing: if user turns off the function, when
the nozzle moves, it keeps retract.
Minimum extrusion before retracting: there should be
a certain quantity of extrusion before retract.
Z hop when retracting: when starting retract, Z axis
raises slightly so as to improve the filament drawing.
⑵
Skirt
Line count: print a round of filament surrounding
model at the bottom layer.
Start distance: the distance between the skirt and the
first layer of model.
Minimal length: the minimal length of skirt.
⑶
Cool
Fan full on at height: height triggered when the fan
runs at full speed.
Fan speed min: the lower limit rate of rotation of fan.
Fan speed max: the upper limit rate of rotation of fan.
Minimum speed: minimal filament feeding speed,
avoid too slow printing speed causes consumable
overflow.
Cool head lift: when the minimal extrude speed is
cooled too slowly, withdraw the nozzle to cool for a
while.
⑷
Infill
Solid infill top: check whether the printing model is
capped.
Solid infill bottom: check whether the bottom of
printing model is covered.
Infill overlap: if the overlapping value of internal
packing and outer wall is bigger, the better they are
connected, but more consumables are needed in this
case.