Instone EASIER, Руководство пользователя

Страница: 18 / 23

www.instone3d.com
17
⑸
Support
Structure type: the type of support structure.
Overhang angle for support: minimum angle triggering the printing support.
Fill amount: fill rate of support.
Distance X/Y: the distance between support and model subject on X/Y axis.
Distance Z: distance between support and model subject on Z axis.
⑹
Black magic
Spiralize the outer contour: after it is enabled, it can print the surface in a spiral shape
and eliminate the interface of each layer.
Only follow mesh surface: after it is enabled, it only prints the surface layer, without
printing top, bottom and internal support.
⑺
Brim
Brim line amount: the bigger the number of brim is, the adhesion effect between it
and platform is better, but it reduces the printing size.
⑻
Raft
Extra margin: additional round of edge on the periphery of raft.
Line spacing: the distance of each line when the raft prints.
Base thickness: thickness of raft printing.
Base line width: base layer lines width of raft
Interface thickness: thickness of the interface layer, which connected the raft and the
model.
Interface line width: line width of interface layer.
Airgap: the gap between the raft and model.
First layer airgap: gap between the last layer of the raft and the first printing layer.
Surface layers: amount of surface layers put on top of the raft.
Surface layer thickness: thickness of each surface layer.
Surface layer line width: width of the lines for each surface layer
⑼
Fix horrible
Combine everything(Type-A): namely integrate all the separate parts of the model
into one, Type-A is dependent on the model normal and tries to keep some internal
holes intact.
Combine everything(Type-B): namely integrate all the separate parts of the model
into one, Type-B ignores all internal holes and only keeps the outside shape per layer.
Keep open faces: software will repair some small damaged surfaces automatically.
Extensive stitching: repair the damaged surface at a higher level.