Instantel Blastmate III страница 51 Скачать руководство пользователя | Manualshive

Страница: 51 / 90

background image

Advanced Module

BlastMate III Operator Manual

4–1

4. A

DVANCED

M

ODULE

The advanced module is designed to smoothly combine with the compliance module. It adds
features to the compliance module without changing the look and operation of the monitor. Before
you can use the advanced features, you must load the advanced software into the monitor using
the BlastWare III software’s advanced module. Once completed, the following features may be
changed in the field using the monitor alone. Please refer to the BlastWare III manual for
complete instructions.

This section of the manual also builds on the previous compliance module section. The operations
you performed using the compliance module are still available to you unless stated otherwise.
Please refer back to the operations in the compliance module when operating the monitor in the
advanced mode. This section outlines those features found only in the advanced module.

4.1. Option Key + Special Key

The

Option

+

Special

key combination adds the following menu item in the advanced mode.

4.1.1. Instrument Mode

The instrument mode displays the current operating mode of the monitor. The mode can be
changed between the Compliance and the Advanced operating modes. This display only appears if
the monitor has been configured previously to operate in the advanced mode.

To display the monitor’s current operating mode, press the

Option

+

Special

keys to display the

Instrument Mode Window. The mode appearing is the current operating mode. To change the
mode, press the

Up

or

Down

Arrow

keys to display the other available mode. Press the

Enter

key to save your setting.

Note

: The advanced software must be installed into the monitor first. See the BlastWare III

manual for further information.

4.2. Test Key

This key tests the sensors connected to the monitor. Unlike in the compliance mode, the test
checks each channel individually. You have to scroll through the channels to see the results of
each.

To test the sensors, press the

Test

key. The message “Press Enter to Perform Channel Check or

Cancel to Exit” appears on the monitor’s display. Press the

Enter

key to continue. The following

display appears:

Figure 4.1 Test Display for the Advanced Module.

«
...
49
50
51
52
53
...
»

Содержание Blastmate III



























































































Отзывы:

Нет отзывов

Похожие инструкции для Blastmate III

Бренд: BANTE inststruments Страницы: 15

Бренд: 3Bays Страницы: 21

Бренд: Eagle Eye Страницы: 3

Бренд: VALTRONICS Страницы: 13

Бренд: JIANGSU Страницы: 8

Бренд: Sanmenxia Страницы: 17

Бренд: SANKO Страницы: 25

Бренд: Samson Страницы: 2

Signet FlowtraMag 2580 Series

Бренд: GF Страницы: 20

Бренд: Ocea Soft Страницы: 19

Vigilantplant NFBU200-S Series

Бренд: YOKOGAWA Страницы: 24

Бренд: horiba Страницы: 117

Бренд: Sequid Страницы: 111

Бренд: Chroma Страницы: 63

Ranger TDR VDV501-090

Бренд: Klein Tools Страницы: 44

Бренд: PRONIVO Страницы: 40

Бренд: socomec Страницы: 34

Бренд: EPE Conseil Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды