located to the right of the viewscreen to change your LCD Setting to “Turn
Off After 3 min.” Setting the LCD to “On” will keep the screen on
indefinitely while recording.
NOTE
: There is no way to turn the screen completely off. The minimum
screen time is a few seconds with the “Off” option. This is available in case
certain manual operations are needed to be made by the driver.
5. Press the OK button (top-left button on the back of the camera) to Confirm
your selection.
NOTE:
One should never test the Backlight (LCD) Setting while driving;
testing should be done in a safe environment.
6. The camera can either be turned off with the Power button on the right side of
the camera (button with open circle with a line through the center) or can
escape out of Menu mode, pressing the Menu/Back button, to begin auto-
recording using the new Backlight (LCD) Settings.
amiGO! Dash Cam DC711 FAQ Version 1.2 (03/22/19)
Page 20
