background image

In  either case, any files that one would like to keep should be backed up first
by connecting the camera to a computer and copied over.   See Formatting
section for additional details.

3. Battery-related

: This dash camera will operate properly when direct power is

connected to the power port on the top of the camera.   Battery life and life
expectancy is not a concern and the camera will continue recording.

If attempting to record Manually and the power has died, the battery is not fully
charged.     The   camera   will   record   for   up   to   10-15   minutes   depending   on
usage, less, specifically, if taking pictures in Photo Mode. The battery should
be re-charged by plugging the Vehicle Power Cable into the power port at the
top of the camera.   A red LED light will glow on the left side of the camera
(when facing the viewscreen; top-most LED with the battery icon next to it).
The battery is fully charged when the red light is no longer lit.

Portable,   external   power   packs   may   be   used   to   charge   the   dash   camera
through the power port at the top of the camera to record or take photos;
alternatively, the battery can be charged through the USB port at the top of the
camera (the same used for power with the Vehicle Power Cable).  However,
use of external power packs may void the camera warranty.

For additional details or troubleshooting, see Battery/ExternalPower (portable
power) section of this guide.

2. Can the dash camera be removed from the vehicle and record manually or

to take photos?

Answer:

 Yes.  The camera can be removed by unplugging the Vehicle Power

Cable and sliding the camera off of the windshield plate.   Without a direct
power source, the camera will, by default, turn off after a few seconds.  The
camera   can   be   turned   on   at   any   moment.     Once   turned   on,   facing   the
viewscreen, Manual Recording can be done by pressing the OK (upper-left)
button.  The camera will record for up to 10-15 minutes depending on usage
or less if taking pictures in Photo Mode.

See   the   Battery-External   Power-Related   section   (Question   2)   for   details
regarding battery life.

amiGO! Dash Cam DC711 FAQ Version 1.2 (03/22/19)

Page 12

Содержание amiGO! DC711
























Отзывы: