17
This item is used to con
fi
gure the boot devices corresponding to boot priority. Se-
lect one boot priority and press [Enter], then select the boot device in the pop-out list to
fi
nish the con
fi
guration.
6. Exit menu
The options in Exit menu can be used to save or discard the settings of the chang-
es in the BIOS and exit the setting program.
●
Save Changes and Exit
Select this item and press [Enter]. After you select <Yes> for con
fi
rmation, the
changes in the BIOS settings will be saved and the system will exit the BIOS setup.
The menu modi
fi
cation function can use [F10] shortcut key to realize.
●
Discard Changes and Exit
Select this item and press [Enter]. After you select <Yes> for con
fi
rmation, the
changes in the BIOS settings will be discarded and the system will exit the BIOS setup.
3.2 Motherboard Jumper Settings
3.2.1 How to Open the Chassis Side Panel
If the user need alter motherboard jumpers, please
fi
rst obtain the authorization
of Inspur Group Co., Ltd. Then open the chassis upper panel according to the following
steps:
1. Power off the system (disconnect AC power cable).
2. Unscrew the 2 screws used for
fi
xing the side panels in the back of the chassis.
3. Push the side panel to the back of the chassis and take down the side panel.
Open the side panel of the chassis
Chapter Three System Setup
