Insportline IN 8245 Nahary, Руководство пользователя

Страница: 11 / 21

STEP 4: FRONT POST AND FRONT POST COVER INSTALLATION
Tools:
Allen Wrench
Remove four M8x15mm Bolts (18) and four Ø8 Curve Washers (19) from the Front Main Frame (28). Remove
bolts and curve washers with the S6 Allen Wrench provided.
Slide the Front Post Cover (20) up to the Front Post (13).
Put the cable end of resistance cable of Tension Control Knob (14) into the spring hook of Tension Cable (86) as
shown in drawing A of figure 4. Pull the resistance cable of Tension Control Knob (14) up and force it into the
gap of metal bracket of Tension Cable (86) as shown in drawing B of figure 4.
Connect the Extension Hand Pulse Sensor Wire B (88) and Sensor Wire (40) from the Front Main Frame (28) to
the Extension Hand Pulse Sensor Wire C (10) and Extension Sensor Wire A (89) from the Front Post (13).
Insert the Front Post (13) onto the tube of the Front Main Frame (28) and secure with four M8x15mm Bolts (18)
and four Ø8 Curve Washers (19) that were removed. Tighten bolts and curve washers with the S6 Allen Wrench
provided.
Slide the Front Post Cover (20) down to the Front Post (13).
11