23
PCB.
12
Displayed E04 on the
screen
The PCB and meter cannot
communicate with each
other
Check the lower communication line, make
sure that PCB and lower communication line
are connected well, Check the upper
communication line, make sure that meter and
upper communication line are connected well.
13
Displayed E05 on the
screen
over current protection
Check whether it is overloading
14
Displayed E06 on the
screen
The problem of motor
Check the motor are connected well,
otherwise, replace motor and PCB in turn to
check them.
15
Displayed E08 on the
screen
Overload protector
If it is not overload, then add oil for running
board, change the running belt or running
board, change the PCB in turn to check!
16
Displayed E09 on the
screen
Overhot protector
Stop the machine and make it to be cold. If it
happens when in normal temperature, then
replace PCB.
17
Displayed E10 on the
screen
Overvoltage protector
Check the voltage, whether it is normal!
18
Displayed E12 on the
screen
incline alarm
Check the VR wire, AC wire, connecting wire
of incline motor, incline motor and PCB,
whether they are connected well or broken.
After checking, restart the PCB.
If you still can’t solve the problems after taking the solutions above, we hope that you can contact our dealer or
company as soon as possible.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure.
Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil Code, Act No.
513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection Act, as amended, also in
cases that are not specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Borivojova Street 35/878, Prague 13000,
Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section
C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Costumer” or simply the “End Costumer” is the legal entity that does not conclude
and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the purpose of
using the Goods or services for his own business activities. The Buyer conforms to the General Purchase
Agreement and business conditions to the extent specified in the Commercial Code.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement made
between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in
the Purchase Agreement, in the Amendment to this Contract or in another written agreement.
Warranty Conditions
Warranty Period
