Swimming Pool Treadmill
(Model: AS100)
Set-up Instructions and Operation Manual
Congratulations!
Enclosed is your Aquasizer Treadmill.
Please read the following set-up and operating instructions and make this information
available to each user of your Aquasizer Treadmill.
1. Carefully unpack the treadmill and handrail from the shipping carton.
2.
Check for any signs of shipping damage.
If found, report to the carrier
immediately.
3.
Please retain your shipping carton
until you have used the treadmill and are
completely satisfied.
4. Review the easy set-up and operating instructions below.
Treadmill Set-up
1. After removing the treadmill from the shipping carton,
place the treadmill flat on
the floor
. If the Aquasizer logo on the side panel is upside down, you need to
flip over the treadmill to orient it correctly.
2.
Install the metal handrail by positioning the curved end vertically and slightly
forward of
the roller on the higher end of the treadmill (i.e. the front of the
treadmill)
and inserting the two metal ends of the handrail over the white guide
tubes located in the mounting sockets and pushing down.
The Aquasizer
Treadmill is now ready to use!
