4.
Replace the battery cover.
5.
If the display is illegible or only partial segment appear, remove batteries and wait 15 seconds before
reinstalling.
STORAGE
Remove the Locking Knob from the Handlebar Support Frame and Main Frame, see Figure 1.
Lift the rear end of the Main Frame up in the vertical position and align Locking Knob hole.
Tighten the Locking Knob by turning it in a clockwise direction into the holes on the left side of the Handlebar
Support Frame and Main Frame, see Figure 2.
CAUTION: Failure to secure the Main Frame with the Locking Knob may cause the treadmill accidental
fall and cause bodily injury.
Remove two Handlebar Knobs from the Handlebar and Handlebar Support Frame. Then push the Handlebar all
the way down, see Figure 1.
Install one Handlebar Knob onto the Handlebar Support Frame by turning it in a clockwise direction into the
hole on the top end of the Handlebar Support Frame that was removed, see Figure 2.
Install the other removed Handlebar Knob onto the right side of the Handlebar by turning it in a clockwise
direction into the holes on the Handlebar and Handlebar Support Frame to lock the Handlebar in place, see
Figure 2.
The unit can be carefully tilted onto its transport wheels for easy moving and storage. Store the treadmill in a
clean and dry environment away from children.
NOTE: Do not stand under the main frame when setting down the treadmill.
TO PREVENT INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN LIFTING
UP OR SETTING DOWN THE MAIN FRAME.
Warning: Keep the children and pets away from the folding machine.
Figure 1
Locking Knob
Handlebar Knob
Figure 2
Locking Knob
Handlebar Knob
