Insportline Gallop II, Руководство пользователя

Страница: 12 / 30

12
WINDOWS
TIME WINDOW
It displays running time. It counts in a positive direction from 0:00 to 99:59. After the count 99:59 has
been reached, this device will stop smoothly and show “END”. Thereafter it goes into initial state after
5 seconds. When counting down, it counts from the set value to 0:00. Thereafter it shows “END” and
enters the initial state.
DIS&PUL WINDOW
It displays the running distance. It displays in the positive direction from 0.00 to 99.9. When the value
99.9 has been reached, it starts counting again from 0. When counting down, it counts from pre-set
value back to 0. Thereafter it shows “END” and stops smoothly. It will enter the initial state after 5
seconds. It displays the runners heart rate. When he/she holds the handle pulse with both hands, the
system can calculate the users heart rate (beat) and show it on the screen. The range is: 50-200
beats/min. Required data are just for reference and may not be considered as medical data.
CAL&INCL WINDOW
It displays burned calories during the workout. The range is from 0 to 999. After this upper limit, it will
count again from 0. When counting down, it goes from pre-set value to 0. Thereafter it stops smoothly
and shows “END”. It enters the initial state after 5 seconds of no operation. Inclination is displayed in
the range: 0 - 20 sections. Once you have finished the running circle of 400 m, the machine will remind
you with a Beep sound and shows the number of circles that you have run within 2 seconds.
SPEED WINDOW
It displays the speed under operation mode in the range: 1.0
– 22 km/h. The window will show P1-
P24-U1-U2-U3-HP1-HP2-FAT under setting mode.
MATRIX WINDOW
Under the stand-by mode, it will show 400 m running away. After finishing this 400-m running, the
system will remind with the Beep sound and show the number or circles you have run.
BUTTON FUNCTION
PROGRAM
Under STOP mode push this button to choose modes circularly “0:00”, “15:00”, “1.0”, “50” (“0:00” is
manual mode, “15:00” is the time count down, “1.0” is distance count down and “50” calorie count
down). When you choose each mode, you can press the speed button and incline button to set the
value. Thereafter press the START button to start this treadmill. Under the stand-by mode, push this
button to choose program from: P1-
P24…U1-U2-U3-HP1-HP2-FAT.
START
When the power is on and the safety key inserted, push this button to start the device.
STOP
It has the PAUSE and STOP function. Under running mode, press this button to pause the machine.
All the data will be kept and the matrix window shows “PAU”. Push the START button in the pause
mode to set it again to work. If you press STOP again, the machine will stop and all the data will be
recovered to initial setting.
SPEED+/SPEED-
Push this button to set the value under the setting mode. Press this button to adjust the speed when
the machine runs.