Insportline Gallop II, Руководство пользователя

Страница: 24 / 30

24
IDENTIFICATION WAYS FOR RUNNING AND MOTOR BELT
TIGHTNESS
BELT AND MOTOR BELT
When the running belt skips, follow these steps to identify which belt must be adjusted (running belt or
motor belt).
•
Switch off the power and screw off the bolt on protection cover. Put the cover off the treadmill.
•
Let it run at the speed of approx. 3 km/h. Step on the running belt and try to stop it with
pressure. If the running belt stops together with the front roller, but the motor still runs, it
means, the motor belt should be adjusted.
•
Let it run at the speed of approx. 3 km/h. Step on the running belt and try to stop it with
pressure. If the running belt stops, but front roll still runs, it means, the running belt should be
adjusted.
RUNNING BELT CENTRING
WARNING:
Don’t overtighten the belt to avoid reduced motor performance and excessive roller
wearing.
HOW TO CENTRE IT:
•
Place the treadmill on a level surface.
•
Run it at speed of 6 km/h (3.5 mph).
•
If the belt moves to the right, turn the right adjusting bolt quarter circle clockwise. If the belt will
not be in central position, do it again (Pic. A).
•
If the belt moves to the left, turn the left adjusting bolt quarter circle clockwise. If the belt will
not be in central position, do it again (Pic. B).
Pic. A
– if the belt moves to right.
Pic. B
– if the belt moves to left.
WARNING: Always unplug the treadmill from the electrical outlet before cleaning or maintaining this
device.