Insportline Gallop II, Руководство пользователя

Страница: 22 / 30

22
MAINTENANCE
Reasonable cleaning and lubrication should prolong the lifespan of your device. For the maximum
effect, keep the belt and deck as clean as possible.
WARNING:
•
The friction between the belt and deck may play a major role in the function and life of your
device. We recommend to lubricate the friction points constantly to prolong its lifespan. Not to
do it could void the warranty.
•
Unplug the power cord before cleaning or maintenance.
•
Stop the treadmill before folding.
AFTER EACH USAGE
Clean and inspect it after each using according to these instructions:
1. Turn off the treadmill with the ON/OFF switch and unplug it from the wall outlet.
2. Wipe down the running belt, deck, motor cover and console casing with a damp cloth. Never
use solvents to avoid damage.
3. Check the power cord.
4. Make sure the power cord is not underneath the treadmill or in any other area, where it could
be pinched or cut.
5. Check the tension and alignment of the running belt. Make sure that the running belt is not
damaged and that all components and parts fit well.
GENERAL CLEANING
1. Use a soft and damp cloth to wipe the edge of the belt and the area between the belt edge
and the frame. Use mild soap-water solution and nylon scrub brush to clean the top of the
textured belt. Do it once monthly and let it get dry before using.
2. Once monthly clean the dust under your treadmill.
3. Once a year remove the rear motor cover and vacuum accumulated dirt.
GENERAL CARE
1. Check all the parts for wearing or damage before each using.
2. Check all bolts and nuts. They must be well tightened.
3. Damag
ed or worn parts must be replaced immediately. Don’t use damaged device.
4. If you are not sure, contact the service.
NOTE: This product contains of moving parts which have been lubricated (greased). Protect the floor
and carpet from leakage and pollution.
PROPER LUBRICATION CHECKING
•
Disconnect the main power supply.
•
Fold the treadmill up into the storage position.
•
Touch the back surface of the running belt.
•
It is slick to touching, no lubrication is needed.
•
If the surface is dry, apply silicone lubricant.