6
(M8)(78)
and the
Bolt, Hex Head (M8xp1.25x65mm)(97)
by using socket wrench
as the main assembling drawing shows.
If the bike is not level, review the
LEVELING NOTE
on the right side to level the
Levelers (27.)
ASSEMBLE INSTRUCTIONS
STEP 3
Slide the
Console Bracket (14)
and the
Upright Sleeve (18)
onto the
Upright Post (5.)
Make sure the direction of the
Upright Post (5)
is in the correct direction
as shown
.
Be careful not to damage the
Middle Connection Wire (109)
while doing assembly Step 3 to 4
STEP 4
a. Make sure 2 pcs
Nylock Nuts (M10) (107)
have already inserted into the front of the
Main Frame (1)
as the illustration
shown on the top right corner
b. Insert the
Upright Post (5)
into the
Main Frame (1)
and secure with the
Bolt, Hex Head (M10xp1.5x50mm)(99)
by
using the
T-HEAD SOCKET WRENCH (17MM)
as shown.
STEP 5
a. Connect the
Middle Connection Wire (109)
to the
Lower Connection Wire (110.)
b. Attach the
Front Decorating Upright Cover (12)
onto the front of the
Main Frame (1
) with the
Screw, Round Head
(M5xp0.8x50mm)(84.)
Содержание 896 SEG 7020
Страница 34: ...34 PRODUCT PARTS DRAWING...
