4
Your gateway box connects your Room Thermostat to the Internet. This box should be
left powered on and connected to your router via an Ethernet cable at all times.
Your Room Thermostat will still function without a gateway box, however you will not
be able to control it from our website or from the smartphone app.
Your Gateway
Installation & User manual
www.insiprehomeautomation.co.uk
Inspire Home Automation
4
Internet Gateway
Plug in the supplied power cable and connect to your router via the network cable.
Pairing and Connecting
This is the process by which the Room Thermostat and the Gateway are programmed
to recognise each other. Your new Room Thermostat should already be paired to
your gateway at the factory, so they should automatically recognise each other and
connect.
Power up the gateway and wait until the Power Light is green. Then power up the
Room Thermostat. Within a few seconds, the connection should be established,
confirmed by the Radio symbol on the Room Thermostat and the RF Light on the
Gateway switching to green.
If the gateway was switched on after the Room Thermostat, then it may take up to 10
minutes to establish the connection. If you do not wish to wait this long, reset
the Room Thermostat by pressing and holding all four buttons for 5 seconds.
Upon reset, the connection should be made within a few seconds.
Setup
