14
Inspire Home Automation
www.insiprehomeautomation.co.uk
Installation & User manual
Functions continued. . .
Press the button to enter the menu, pressing again will cycle through the
following options (If program advance is enabled, you will need to hold down the
key for 3 seconds to enter the menu.)
To exit the menu press the and buttons simultaneously.
Setting the clock
To set the clock manually Press then use the and keys to set the hours
then press this will take you to the minutes and then the days which are set in a
similar way.
Boost Mode
This is used if you would like to switch your heating on for a set period of time. To use
this feature you need to activate it on our website in the ‘Setup’ section within your
account.
Once activated, the boost function is enabled by pressing and holding the button
for 3 seconds. The ‘ON’ will flash to show that boost is currently active, and it will
switch your heating on for the programmed length of time, at the programmed Boost
Temperature (If set.) After this time has expired, the Thermostat will return to the
previous state.
Program advance
This is used if you would like to ‘jump’ your thermostat to the next profile
temperature. To use this feature you need to activate it on our website in the ‘Setup’
section within your account.
Press the key to ‘jump’ to the next Temperature in your schedule. It will only
have an effect if the Thermostat is in profile mode (P1 or P2).
Pressing the key a 2nd time will cancel the program advance and the
unit will revert back to the set temperature.
