Foot Plates
3/8” Barrel
Spacer
Rubber Bumper Pads
4 – 3/8” Barrel Spacers
4 – 1” Button Head Bolts
4 – 3/8” Small OD Washers
4 – 3/8” Thin Lock Nuts
Step 16: Install Two Adjustable Bumpers.
Step 17: Attach Foot Plates to Press Arms with Rubber
Bumper Pads towards top as shown using: Four (3/8” Barrel Spacers)
Four (3/8” x 1” Button Head Bolts)
Install Bolts, Washers, and 3/8” Bushings Four (3/8” Small OD Washers)
first, and tighten the Bolts. Next, attach Four (3/8” Thin Lock Nuts)
the Thin Lock Nuts and tighten.
(Tighten Bolts with 6mm Allen Wrench)
Step 18: Foot Plate Stop Adjustment:
To adjust Foot Plate Stop angle, loosen jam nut, screw in or out the Adjustable
Bumper, and retighten the Jam Nut.
Page 7
STEP 17
STEP 18
Press Arms
STEP 16