Attach Seat & Handle to
these sets of holes for
more pre-Stretch
Seat Base
Leg Press Base
Seat Base
2 – 1” Hex Bolts
2 – 3/8” Flat Washers
2 – 2 ½” Hex Bolts
4 – 3/8” Flat Washers
2 – 3/8” Lock Nuts
2 – 2 ½” Hex Bolts
2 – 3/8” Flat Washers
Step 12: Attach Handles to Leg Press Base using:
Two (3/8” x 2 ½” Hex Bolts)
Four (3/8” Flat Washers)
(Wrench Tighten Bolts)
Two (3/8” Lock Nuts)
Step 13: Attach Seat Base to Back Pad Stem using:
Two (3/8” x 1” Hex Bolts)
(Wrench Tighten Bolts)
Two (3/8” Flat Washers)
Step 14: Attach Seat Base to Leg Press Base using:
Two (3/8” x 2 ½” Hex Bolts)
(Wrench Tighten Bolts)
Two (3/8” Flat Washers)
Step 15: Install the Seat Pads into the Seat Bases by working the edges of the pads into the
groove around the Seat Bases. Do not use sharp objects during installation of
the pads.
Page 6
STEP 14
STEP 12
STEP 13
Handles
Seat Pad
Seat Pad
Back Pad Stem
Attach Seat & Handle
to these sets of holes
for more leg room
STEP 15
