2
Cross Hair measurement
Automatic Edge Detector measurement (ISP-A1000E)
Counter clock wise direction
Clock wise direction
Degree Decimal mode (90.0000°)
Degree Minutes Seconds display mode (90°.00'.00'')
Contrast level increase
Contrast level decrease
Select
Exit
Open
Yes
No
On (Disable)
Off (Enable)
Auto edge detection setup (ISP-A1000E)
Engineering Setup
View Results
Delete Selected Result
Delete all result
A
Program menu
Tolerance option
Print Result Buffer
Repeat Function
C e n t r e - N e a r - F a r K e y. Vi s i b l e o n l y w h e n r e s u l t i s
constructed Distance Either from two lines or two circles.
Center Distance between two circles or lines
Nearest Distance between two circles or lines
Farthest Distance between two circles or lines
25
The surfaces of optical parts should be kept clean. They should not
be touched with hands. If any dirt, oil fleck or dust are found on the
surfaces, they should be removed with soft brushes, or they should
be removed with clean linen or lens paper soaked in methyl benzol
or in a mixture of alcohol and ether. Try to rub the optical surfaces as
less as possible.
The instrument should not be operated with a big force. All bare
metal surfaces of the instrument and the accessories should be
wiped clean and coated with protection grease after operation.
When work-piece with larger diameter is to be measured, take down
objectives 50x and 100x and place them into the accessory box.
Objectives, guides and condenser have higher precision. They
should not be dismantled optionally. If it is necessary, they should be
sent to the specialized factories for repair.
2
3
4
5
