10
Point Measurement:
Measurement
1
Press [ ] key to measure a point.
Now move the X-Y table near to the desired point. Match cross
hair on the point and press [ ] key.
Take more points or if sufficient points are taken press [ ]
key.
A
Line Measurement:
A line can be measured by selecting between 2 to 20 points.
2
Press [ ] key to measure a line.
Now target a point on the line and match cross hair on it. Press
[ ] key.
A
Now in similar manner probe sufficient points to form a best fit
line. And then press [ ] key.
A
Circle Measurement:
A circle can be measured by selecting between 3 to 30 points.
3
Press [ ] key to measure a circle.
17
Press key which displays the list of measured features.
A
Scroll using the navigation keys and press {}key to select the
feature. On pressing the will select the previous result
automatically.
Press [ ] key to complete the construction and calculate
the result.
Different types of construction:
