19
20
The data output is of the standard RS232 C format, and can
be connected to the serial PC port via cable.
5. The data output:
6. Precautions:
Do not fall off or collide the digital display meter and do not
apply too great a force.
Do not dismantle the digital display meter.
7. Characteristics:
Measurement of force: 5-10 N measuring range: 0-25 (the present
product supplied)
resolutions: 1µ
m
Power consumption: ≤ 35 µA operation temperature: 0-40°C
storage temperature: -20 - 60°C
Do not press the key with a sharp object. To press a key, please
move along the moving direction of the key, otherwise, it will
affect the sensitivity of key.
Please do not use or store the digital display meter at a location
with direct sunlight, or an environment too cold or too hot.
Please do not use the digital display meter in an environment
with too high voltage or strong magnetic field.
The dry soft cloth or cotton may be used to wipe the stains on
the surface of digital display meter. Do not use organic solvent
such as acetone or benzene to clean the meter.
Use soft cloth to wipe the measurement face before
measurement.
Please take out the battery if the meter is not to be used for a
long time.
8. Trouble shooting:
Symptoms
The LCD screen
displays "E 1".
The LCD screen
displays "E 3".
The measurement
value is not
accurate.
The LCD screen
does not display.
The displayed digit
is not stable, not
clear; The displayed
digit is not changing
or is confused.
Possible causes
The computer data
overflow.
1. Interference exists
in the peripheral
environment. Perhaps
the sensor is stained
with foreign object to
result in a mistaken
sensor.
1. Measurement face
may be dirty.
2. The setting value
may be not accurate.
1.T
he battery
installation
is incorrect.
2. The battery may be
short of capacity.
1. Battery voltage is
possibility less than
1.45V.
2. The battery
installation
may be
incorrect.
Remedies
Move the screw rod
in reverse direction
to resume the normal
displayed value; Or
press ON/OFF
…
SET
key to set up again
the initial value of
measurement.
1. Reinstall the
Battery.
2. Send back to the
factory for repair.
1. Wipe the
measurement face.
2. Check the setting
value, and set up
again.
1. Reinstall the
battery.
2. Replace the
battery.
1. Replace the
battery.
2. Reinstall the
battery.
2. The sensor breaks
down.
