13
14
Choice the camera item, select the
Use the computer to view the image
format of the image to view the image
For model ISM-DL120 machine, a software disk is provided and the
function is available after installation of the two programs from the
disk (Install Photo Impression, Install Driver).
A clearer image may be observed from TV set via AV output
since there is limit of pixels on the LCD screen (800X600).
Similarly, the pixels of photo taken with the microscope may
reach 2048X1536, and the image will clearer under photo
playback mode or when observing photo from the computer after
transmission.
3.12 Image view
Ⅳ
.
Maintenance
For the sake of good microscope protection, it is required to avoid
dust, water and humidity intruding into the instrument, otherwise,
the photo route and the electronic circuit of microscope might be
damaged. Moreover, the apparent grease spot, finger print on the
surface of optical kit, dust, dirt stains will effect the imaging
quality.
When the microscope is not in use, the microscope should be
covered with a clean sheath timely to prevent dust from entering in.
The product is suitable for application and storage indoor, with the
environ-mental humidity for operation and storage being 30%
－
80%. The environmental temperature for operation and storage being
0°C
－
40°C.
Optical section
The lens should be stored in a dry environment, and it is available to
place it in a container with drier agent.
If the surface of lens is attached with dust, please use an air blower
ball to clear it off.
If the surface of lens is attached with finger print, dirt, greasy stain
or other trace not available to use an air blower ball to clean, please
use absorbent cotton or lens paper dipped with a little alcohol or ether
mixture (proportion 1:4) to wipe off them lightly.
Notice:
Under no any circumstances should the lens surface be dry
cleaned, otherwise the surface of lens may be damaged.
Moreover, it is not allowed to wipe the lens with water or other
liquid solutions.
It is required to pay attention that no heavy pressure on the surface
of color LCD screen is allowable during operation and storage.
LCD screen
In case the LCD screen surface is dirty, it is only available to use
clean and soft cloth to wipe lightly, and it is forbidden to use organic
solution agent to wash and clean.
It is forbidden for the consumers to disassemble the microscope by
themselves, least there is danger of damage or electric shock.
